Car led bulb on the outside of your car has a safety function. This may seem obvious, but think about how often you see somebody driving around with a tail light out, or with only one car led bulb of brake light.The fact is these little bulbs are often neglected. Many people don't replace them until they get pulled over and have to try to avoid the fine. It only takes a second to inspect all of your car led bulbs .
The bulbs for all of your red, white and yellow lights are hidden behind a colored lens. In most cars and trucks they're all in one place but some vehicles used a few separate lens assemblies. Either way the same process applies. Don't be a slacker. Take 5 minutes and do a walkaround. Even if you find a dead bulb, we can help you replace it in no time. The last thing you want is a ticket or an accident.
First you need to remove the lens housing from the car. It's usually held in place with a few Phillips-head screws. Be sure to put them someplace safe. Now's not the time to lose a screw.car led bulbs for all of your red, white and yellow lights are hidden behind a colored lens. In most cars and trucks they're all in one place but some vehicles used a few separate lens assemblies. Either way the same process applies.
Now that you have the screws out and safely stowed you can pull the entire bulb assembly, or housing, out of its hole. You won't be able to pull it out too far because of all the wiring holding it in, but you don't need much space. Just don't pull hard on the wiring. Most assemblies will pull out as a whole, but some have a removable outer cover. These are even easier so if you have one you should count your tiny blessings.