Car lights is rather important for car, usually we can see the car lights are the eyes of the
car. Only when there is enough brightness and correct beam angle, can we have a safe
and comfortable driving. Therefore ,it is very important for us to make sure the enough
brightness and correct beam angle, and now we discuss how we can do it well.
At first, we should check all the light of the whole car, including headlamps, car led lights,
auto led lamps width-indicator lights, car led lights and other car lights .When check the light, we have better
turn on all the light. When find the bad phenomenon, it may be the lights have been burned
off or the blown fuses are broken, we should change the bad lights or change the blown
fuses.
Secondly, examine and adjust the headlight beam. In order to ensure the safety of driving
at night, we should check regularly to adjust headlamp beam to conform to the
requirements of the State.
Thirdly, the method how to adjust the headlamp beam: use the tester to adjust
headlight light. Normally the tire pressure is empty. When the headlamp is off, first
to see the sockets and wiring in poor condition caused by or fuse blown. If it is
determined damaged headlight bulb, first remove the headlight of the decorative
cover, remove the headlight retaining screws prevent demolition if there are other
accessories should be removed. Remove the headlamp wick, carefully unplug the
cord and plug, and then press and remove the reverse order, the new wick-loading complex. After re-installed do not forget to adjust the headlamp illumination angle.) replacement
headlamp halogen bulb. Models commonly used in recent years the headlamp
halogen bulbs, halogen bulbs burn out when the time, remove the headlight wires
and plugs, remove the dust cover, rubber holder, and burned-out halogen bulbs. Then remove the car lights in reverse order of loading complex