Company-News
Automotive LED daytime running light mounting method
2012/10/07
Automotive LED daytime running light mounting method
1, the installation position
In the front office position ( by selecting suitable models .) and as much as possible to avoid high temperature and easy water areas. Remove DRL installation instructions, according to DRL installation instructions, in the car with a
daytime running light fixed hole drill. After a good start in the daytime running lamps are fixed by screws in the car
2, line installation
1) check the daytime driving harness, will harness the two interface are respectively connected with
daytime running light ( interface reference manual).
2) check the daytime driving harness to find a black, brown, gray line three line. The black line is connected to a vehicle ignition switch output end; brown line connects the negative terminal of the power supply;
Gray line is connected to the output end of xenon headlight switch.
3) connected to the harness arranged and fixed on the long bus lines should be avoided in the wiring harness ties in places of high temperature ( such as machine )
This Paper Is Divided Into
1 PageNext:
What you need to know when installing Daytime running lightsPrevious:
many countries have enacted relevant daytime running lights related standards