Specifications:

1.Third generation mini led ghost shadow lights Voltage:12V-24VDC

2.Power output: CREE 6W

3.Product size: 84mm (length) x 28mm ( diameter)

4.LED make: CREE

5.Casing material: High-strength alloy case

6.Waterproof, shock resistance

7.When you open the door the car logo will be projected on the ground. When the door is closed the light will be off automatically

8.Logo projection: This courtesy lamp project the car logo on the ground via a pre-designed individual car logo film. You can buy different brands of car logo films separately. It takes you only a few seconds

9.Smallest size: 34mm (length) x 17mm ( diameter)

Third generation mini led ghost shadow lights 6W for the car

Installation steps:

1. led ghost shadow light should be installed at the bottom of the door flame and make sure the Len vertical with the ground.

2.Pull down the inside door board first. Mark the suitable location for drilling a hole.

3.Drill the hole on the door board with our borer.

4.Inset the product from the bottom of car door, and then arrange the power cord.

5.Install the nut through the power cord upon the hole inside; tighten the nut.

6.Connect the power cord according to the installation guide.

7.Adjust the lamp projection to the suitable place with wrench tool.

Any quetions ,pls chat MSN:sales8.fuchw@hotmail.com