Summary
Hid lamps rises the voltage from 12V or 24V up to 23000V by using electronic ballast , across the electrodes to break down the resistance between electrodes, and then Hid bulb to run
HID lamps is used as headlamp of cars, buses, trucks and so on.
Main characteristics
1. hid headlamp is 2~3 times brighter than conventional halogen bulb,
2. the operating power is 35w, a nearly 1/2 reduction in power consumption than conventional halogen bulb.
3. The service life ofHID headlamp is 5-10 times as long as conventional halogen headlamp.
4. HID headlamp has various protection functions, it is trustworthy to use.
Product direction
1 A set of HID headlamp system included 2 Xenon bulbs,2 ballasts and some wires.
2 The base of HID headlamp just like the halogen’s, when you install the HID headlamp , you needn’t change the original system anymore, so it is simple to install. In order to insure the HID headlamp work stably, please let the engineer do it.
3 HID headlamp has many color temperatures to choose, such as 3000k ,4300k, 6000k, 8000k, 10000k,12000k, 14000k, 20000k, and 30000k.
4 We provide a series of types of Hid headlamp.
Main technical data of Hid ballast
1 The inputs voltage : DC 9-16v or 8-32v.
2 Starting voltage: AC 23000V.
3 Operating power: 35W or 55W.
4 Environment temperature: -40~+105℃.
5 Service life: 3000h.
Details
1 Shut off the power supply.
2 Open the car’s engine cover.
3 Take off the original bulb and fix the HID headlamp to the same place
4 Look for a suitable place to fix the Hid ballast.
5 Contact the plugs between ballast and Hid headlamp.
6 Contact the ballast to the power supply at the same electodes.
7 Check the connections.
8 Check the fuse.
9 Turn on the headlight.
10 Adjust the headlight focus to the suitable place.
11 Choose the car’s engine cover.
Pay attention to
Fix the ballast toughly and keep it off the hot.
Warning
The output voltage could reach as high as 23000v at the moment of turning on the light, So:
1 Let engineer install or dismantle the Hid.
2 Obey the rules strictly.
3 The current may exceed 10A at the moment of starting the ballast, please choose a fuse of 15A.